Wednesday, February 4, 2015

If you spray glazes....try the 3M PPS





If you spray glazes you may like this idea from Don Olliff in San Diego. He sprays with a low pressure high volume (HVLP) spray gun but has found that using the Liners and Caps ( Lids) from a 3M PPS system make it easy to spray, clean and store glazes.

I will let you investigate the system but you buy the liners (I think 50 in a pack) and then you get an adapter for your spray gun and then you can just fill the liners with glaze and when you are done glazing with that color you just take it out and set it aside, put in the next color (or liner) and glaze away. That way you don't need 5 guns to spray a sequence you just need 4 liners.  Also you can store
the glazes in the liners as they have caps which seal and keep them wet.

There are two sizes of liners, the one shown in the photos is the larger size. Don uses the smaller 6oz. size most of the time. He only uses the larger ones for glazes that he knows he will use many times. 

Adjusting the air pressure can make a big difference in the finished glaze. Especially with multiple layers of glazes.

I will include this link but you can just google to find a lot on it:

http://www.amazon.com/3M-Lids-Liners-Total-Mini/dp/B00FXYAIBE/ref=sr_1_1?s=automotive&ie=UTF8&qid=1422152282&sr=1-1&keywords=3M+PPS+Lids+%26+Liners%2C+Total+of+10+Lids+%26+10+Liners+%28Mini%29  
http://schoolofwood.com/node/33


Here is some of Don's work. He is spraying a variety of glazes (Stephen Hill style):




https://www.etsy.com/shop/impatientpotter



Don would be happy to answer  your questions:  dolliff@att.net